Send SMS
Surface Profilometer
155.00 - 1000.00 INR/Piece
Product Details:
- Operate Method Manual
- Usage To measure surface profiles
- Color Gray
- Product Type Profilometer
- Weight 350 Grams (g)
- Material Plastic and Metal
- Click to View more
X
Surface Profilometer Price And Quantity
- 1 Piece
- 155.00 - 1000.00 INR/Piece
Surface Profilometer Product Specifications
- Profilometer
- Plastic and Metal
- 350 Grams (g)
- Manual
- Gray
- To measure surface profiles
Surface Profilometer Trade Information
- Telegraphic Transfer (T/T) Cheque
- 100 Piece Per Day
- 2 Week
- Corrugated Box
- All India
Product Description
Surface Profilometer
Model : SRT-6223
SRT6223 surface profilometer roughness tester is mainly used for industries of shot blasting & sandblast, printing, spraying& anti-corrosive, etc, where surface roughness testing is requested.
- This Digital Surface Profile Gauge is a hand held gauge for fast and accurate measurement of the peak-to-valley height of the surface profile of blast cleaned surfaces.
- It meets the standards of ASTM D 4417-B, IMO MSC.215(82), SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000. Suitable for the laboratory and can be used in harsh field conditions. Accurate, quick and repeatable results.
- The tungsten carbide tip will last for up to 20,000 readings and can then be easily replaced by the user in the field.
- Cost per test is significantly lower than other test methods.
- Used the exclusive Micro -computer LSI circuit and crystal time base to offer high accuracy measurement.
- Can communicate with PC for recording, printing and analyzing by the optional software and cable for RS232 interface. USB adaptor and Bluetooth interface can also be used.
- Automatic power off to conserve power.
- Widely used in field of blast cleaned surface measurement. If the profile is too large the amount of coating required to ensure adequate coverage increases, otherwise there is a danger that the peaks remain uncoated - allowing rust spots to occur. If the profile is too small, there may be an insufficient key to produce adequate adhesion, leading to premature coating failure. Ensuring the correct surface preparation optimizes the performance of the coating and material usage.
- Display: LCD
- Range: 0m to 800m (0 mils to 30 mils)
- Accuracy:±5% or ±5m, (whichever is the greater)
- Resolution: 1 m (0.1 mils)
- Metric and Imperial switchable
- PC interface:
- Measurement speed: >30 (readings per minute)
- Power off : 2 modes (Manual off at any time by depressing the
- power key till OFF shows on the display or Auto power off after 3
- minutes from last key operation.)
- Weight: 280 g
- Dimensions: 162-65-28mm (6.38" x 2.55" x 2.10")
- Operating temperature: 0°C to 50°C (32F to 120°F)
- Case: High impact ABS
- Batteries: 4x1.5v (AAA) battery
- Accessories: Main unit, Carrying case, Operation manual
- Optional accessories:C cable, USB adaptor, Bluetooth interface
Enter Buying Requirement Details
Other Products in 'Surface Roughness Tester' category
 |
S. L. TECHNOLOGIES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
Send Inquiry