Welcome to using LX28 infrared motion sensor switch.
The product is a new saving-energy switch, it adopts good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, saving-energy and practical functions. Three detectors inside compose a wide range detection field, it utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely, possessing the functions of power show and detecting show.
Power source: 220V/AC-240V/AC
Power frequency: 50-60HZ
Time -delay:min: 8+/-3sec
Detection angle: 360o
Ambient light: <3LUX-daylight
Working temperature: -20-40degree
Detection distance: 12m max(<24degree)
Rated load: 1200W (220-240V/AC)
Power consumption: 0.45W(static 0.1W)
Installation height: >3m
Detection motion speed: 0.6-1.5m/s
Working humidity: <93%RH
Switch Function: Auto/Off/Manual Override
* Identify day and night automatically. Can adjust ambient light according to your desire: when turn to SUN (max), it will work in the daytime and at night. When turn to MOON (min), it will only work under less than 3LUX circumstance. As for Adjustment, please refer to testing way.
* Detection distance can be set according to installation position and detection field.
* The power show and detection show: the indictor lamp will flash one time each 4 seconds after switching on the power, and flash two times per second when receiving the signal. At the same time, it shows the sensor in the normal detection conditions.
* Time-delay is added continually: when it receives the second induction signal after the first inductor, it will compute time once more on the rest of the first time-delay basic. (Set time)
* Time-delay adjustment: it can be set according to your desire. The minimum is 8+/-3 sec; the maximum is 7+-2min.
* Locking function: during working, when power is shut off 2 seconds and then on, the sensor will be locked automatically and keep load working continually(for example it will always lighting). And shut off the power for 4 seconds and then on, sensor will resume automation.