Analog Insulation Tester

Get a Price/Quote

MOQ : 1 Piece

Analog Insulation Tester Specification

Analog Insulation Tester

FEATURES

High quality Taut Band movement.

Three insulation test voltages (DC) : 250V, 500V, 1000V

Two continuity test on low ohms : 500 Ohm & 3 Ohm.

Small and lightweight, all in one case (do not need bag).

AC voltmeter with linear scale up to 600 Vac.

210mA continuity short circuit current.

1mA test current on insulation test at nominal voltage.

Automatic discharge of capacitance and inductive circuit with charge shorted in the circuit under test.

Live warning and display of external voltage presence.

Fuse, air gap, crowbar and overload protected.

On line battery monitoring shows if battery is ok.

Very low battery consumption.

On-load battery check (+/- 205mA load for worst case).

Mirror scale.

Push and turn locking switch for long and hand free testing.

IEC 1010 CAT III 600V.

BS 16th edition.

SPECIFICATIONS

INSULATION RESISTANCE
Test Voltage (DC V)	250V / 500V / 1000V
Output Ranges on Open Circuit	Rated test voltage +/-10%
Measuring Ranges	250V : 0-100M Ohm / 500V : 0-200M Ohm / 1000V : 0-400M Ohm
Mid-Scale Vale	250V : 1M Ohm / 500V : 2M Ohm / 1000V : 4M Ohm
Scale Multiplier	250V : x 1/2 / 500V : x 1 / 1000V : x 2
Accuracy	+/- 3% of indicated value
Output Short-Circuit Current	1.3 mA
CONTINUITY
Measuring Ranges	3 Ohm / 500 Ohm
Output Short-Circuit Current	>= 210 mA
Accuracy	+/- 1.5% of scale length
AC VOLTAGE
AC Voltage Range	0 ~ 600V AC
Accuracy	+/- 3% of scale length
GENERAL
Voltage Warning	Warning light circuit live lit from 90Vdc/70Vac buzzer beep from 24Vac/dc
Battery Check	Battery check indicate good batteries from 8Vdc to 13Vdc during a load test of 205mA
Battery OK	Battery OK Led from 8Vdc and is operative while testing
Power Source	1.5V(SUM-3) x 8 Type AA
Dimension	170(L) x 165(W) x 92(D)mm (with fousing front cover)
Weight	Approx. 1.1 kg (battery included)
Accessories	Test leads, fuse (0.5A 250V), shoulder belt, instruction manual, batteries